Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes….If pressing Power does not work:
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
What does the LF code mean on a Maytag washer?
too long to fill
If F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. Either the F8E1 or the LF error codes may indicate there is some problem with the water supply going to the washer. Please make sure both inlet hoses are connected and both hot and cold water supplies are turned on.
What does LS mean on washing machine?
The “LS” error code is indicating that the control board cannot detect that the lid switch is opening or closing when the lid is opened and shut. There is a disagreement between the motor and the machine control board on the state of the lid switch.
How do you clear the LF code on a Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I fix the code on my Whirlpool washer?
The Whirlpool washer Lo FL error code is displayed when water is not detected entering the washer or it’s not filling the washer fast enough. Make sure the water supply hoses are not kinked or pinched and that screens in the supply line are clear of debris.
What to do when your washing machine says LF?
When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
Why is my Maytag Bravos not showing LF?
LF in the display When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.
What does F8 E1 mean on a Maytag washer?
F8 E1 or LF or LO FL Error Code in the Display of my Maytag Washer. Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes. Depending on your model, you could see any one of these error codes. See your Owner’s Manual for further assistance.
How to remove error code from Maytag washer?
Make sure to open both faucets completely for proper fill. NOTE: Both Hot and Cold water must be supplied to the washer. To remove the error display, press Power once. Then press Power again to restart the washer. Unplug the washer or disconnect the power for one minute.
